matt scannell on neil pert

Matt Scannell on Neil Peart
Artist P.O.V. 

 

Words by Mover

Matt Scannell, the lead singer of Vertical Horizon, knows the value of patience. It took more than six years for the band to finally release a follow-up album to their big 1999 hit, Everything You Want. Its delay was the result of a corporate purge at their label that left the Vertical ones out on the street of broken dreams without a record contract.

After much soul-searching, the band decided to defy the suits and work their way back — but it didn’t happen overnight. As part of their personal survival plan, each member set aside time for his own projects. Scannell worked with Richard Marx as a co-writer and lead guitarist in Marx’s touring band.

But besides that, Scannell slowly developed a personal friendship with drummer Neil Peart. Scannell’s association with “The Professor” was not originally based on music but on a chance meeting and discovery of similar interests. Mutual professional admiration aside, the two organically developed their friendship outside the artificial bounds of recording studios, tour buses, and other rock ‘n’ roll scenery. Cars, watches and hiking were the order of the day; not sound checks, video shoots, and trips to Guitar Center. For the two new friends, there was no Vertical Horizon and no Rush, either — just two guys building a friendship day by day.

But Scannell and Peart are not just two ordinary guys, and it was only a matter of time before the subject of music eventually surfaced. After their non-musical friendship had been established for a number of years, Peart, with his songwriter’s hat on, offered Scannell lyrics that sparked him to write a song; and then it was off to the races. One thing led to another until Peart put down his pen and picked up sticks to lay down drum tracks on their collaborate song, as well as two others penned by Scannell.

The enthusiasm with which they approached this project shows in both Scannell’s recounting of the genesis and recording of the song and Peart’s account of it, which can be found in his online diary. There may have been no rush to do this record, but it was obviously a rush for the two of them to do.

Matt Scannell: It was kind of an incredibly circuitous journey, it wasn’t like we got together to work; the work came last, actually.

Drumhead: There was a friendship?
MS: Yeah, we became friends.

DH: How so? Did Vertical Horizon open up for Rush?
MS: No. The main connection came through my girlfriend, funnily enough. The short version of the story is, Neil was selling a car to a friend of my girlfriend who owns a BMW dealership down in Texas, and he needed pictures of Neil’s car to put up on his website. So he asked if we would go over and take some pictures of this guy’s car.

So I went over to take pictures of Neil’s car. I had never met him before, and I was really excited because Rush was my favorite band growing up, and those guys are really the reason I play music. Then, as we opened the gate to say hello, I was thinking about what I could say to him to let him know how great this was for me to meet him, and he just shook my hand, looked me right in the eye and said, “You know what? I love your work.” I was like, wow, man, what a beautiful moment. I mean, how cool is that?

And it was funny, because we both love cars; we had all these similar interests. I was wearing a watch that he liked — that was a watch that he used to own — and we just started talking and hitting it off.

 

DH: So he’s based in LA now?
MS: Yeah, he lives here now. When so much of your life is spent on the road, there are some people who can understand it and some people who can’t. It’s kind of nice to hang out with people who have had that experience and you can just understand each other almost implicitly. I felt that way with Neil: that he and I just both understood where each of us was coming from.

DH: Instantaneous click
MS: Yeah! There’s no doubt about it that when I first met him I was really excited to be able to speak with one of the people who was most influential on my life and my career and my music. But very soon thereafter, it was just “my friend Neil.” And in some ways, I think the best thing about all this is that I have this great friend who just happens to be a monster, one of the greatest drummers of all time and an incredible lyricist.

A Way With Words
MS: Then somewhere along the way, we sort of talked about getting together. I can’t remember if it was me or him, but it probably was me who said we should get together and write some time.

We both sort of embraced the idea, and a couple of months later he just said, “I’ve got this idea that I think might be really good for you. Do you want to check it out?” It was a lyric called “Even Now.”

So he came over, and I took a look at the words, because he writes lyrics on his own and then brings them in. I looked at them and the music just flowed out instantly, and he noticed it. I remember he said, “Is this something you had, that you’ve been working on?” And I said, “No, it’s just coming out right now.”

DH: I wonder if having the opportunity to do this for you, outside of writing for Geddy Lee and Alex Lifeson, (Peart’s bandmates) also affords him the opportunity to go in a different direction lyrically.
MS: (excitedly) Yeah, yeah, I think you’re right. He loved the subject matter for my voice. You know, I think he knows that what I’ve done as a lyricist and as a songwriter has tended to be sort of relationship-focused, relationship-based lyrics and that’s, well, a romantic relationship. A lot of his lyrics are about relationships, but they tend to be a bit bigger.

DH: Man and science, science and nature.
MS: Yeah, and the situation that we find ourselves in as human beings. I’m really sort of micro, looking at why some romantic relationships work and why some fail. So I know that he embraced the idea of working on a song that maybe had a little bit more of a direct connection between two people in a romantic way. And I gotta tell ya, I think he did a really great job.

Lyrical Drumming
DH: It’s interesting because he’s not only incredibly intelligent, but his choice of subject matter is usually so poignant and diverse… and quite important, as well. I can only imagine that somebody like you or Geddy must love working with him because rhythmically the stuff is just so dead on.
MS: I think it puts him in an interesting position as a drummer because he’s so tied into the words that the vocalist is singing — it makes him almost more invested in making sure that the drums serve the song and serve the lyrics. I always knew when I listened to Rush records that they were all working together as a whole, but I didn’t realize how much he plays for the lyric until we worked together, which was shocking. It’s really interesting because — at least in the case of our session — he wanted to raise the vocal up, lift it up to make sure that it was rising to the top of the music. He wanted all of the music to serve the lyric and the vocal. So much so that there were even times that I had to encourage him to play a little more, you know, “it’s ok to play more.”

DH: So he didn’t necessarily get any special treatment?
MS: If you had asked me that three years ago, when I didn’t know [Neil], I would have said yes, it would have been “whatever you want to play, it’s all going to be perfect.”

But it wasn’t like that. He just wanted to come in and do the best job. He would be the one who would say, “I think we can do that a little better, we can try that one again,” so he wasn’t at all tripping. It was the best.

You know, this guy is at the top of his game because he’s absolutely driven to be the best player he can possibly be, and he embraces all of those around him.

The Writing Process
DH: What was the process of putting the three songs together? From what I’ve read, lots of times Rush tends to send things back and forth to each other as a writing process, and they’re not always in the same room together actually working things out or feeding off of each other in a creative way.

MS: The writing process was interesting because once we had written “Even Now,” I said to Neil, “You know, we’ve got this song together and I sure would love it if you would play on it,” not knowing if he’d be into it or not. And he said, “Matt, no one else can play drums on it — I won’t let anyone else play drums on it. I have to play the drums on it.”

So, we wound up getting Capitol’s studio B for a day, and I’m thinking, Neil’s going to come in and bang that song out, and then we’re going to go to lunch or something. So I said, “How would you feel about maybe playing on a couple more songs?” And he said, “I’d love to hear the stuff.”

At the time, he was actually up in Toronto with Alex and Geddy working on pre-production for the new Rush record. I’d send him the songs and he would go and just rehearse to them. Alex was his engineer,and he would record Neil playing to those tracks and then email them back to me. So he and I developed a dialogue that way.

DH: Did the tracks that you sent him have a guide, like a drum machine?
MS: Yes.

DH: So your initial idea was in there for you to write to.
MS: Yes, I use BFD when I’m writing — either BFD or Reason. I sent him one version with the guide drums and one version with just the click. He’d send me back something, and we’d work with it from there.

The Sound Of Surprise
One of the things I was amazed about was his dynamic range. I’d never worked with somebody who had the ability to play so quietly and sensitively in certain places and then get so big and bombastic in others.

Neil had this way of playing closed hi-hat patterns in the verse or the pre-chorus and then opening the hi-hat up in the chorus. At first when I was listening to it, I would be thinking, shouldn’t we be going to a crash or something else here? But nothing was missing, in a way that I don’t think I really heard before.

DH: Well, your ears are trained for something else you’re used to.
MS: Yeah, and when I sat back and really listened to what he was doing, it was cool because he was opening up possibilities for me to bring in other guitar ideas and other musical elements that would add additional support to the chorus. But again, he wasn’t stepping all over everything else and making room for the drums, he was making the drums fit into the track in a really cool way.

DH: He’s very much a composer. He may be sitting on a so-called “non-melodic” instrument, but he’s very much a composer.
MS: Absolutely.

Making Tracks
DH: When you got into the studio with Neil, what was the recording process like? Did the whole band all play at the same time? Was he playing to scratch tracks that you did with a click, no click…?

MS: When we went into Capitol, Sean Hurley the bass player came, and Sean and Neil set up in the big room. The two of them were recording to scratch guitars, vocal, and a click that I already laid down. But generally, they spent most of the time with a little bit of vocal and a little bit of click.

 

DH: Was it multiple takes and you pick and choose what you want to do with them later?
MS: Yes, we did do multiple takes. I went in for the finest details and would maybe move a fill from one take to another, but we were being that picky only because I could.

It wasn’t like grim situations I’ve been in before where we’ve only got one bar for the verse that actually works, so we have to just loop it back and use it all throughout the song.

It wasn’t like that at all. The bar is so high with [Neil], it’s just really inspiring and really unbelievable. He just sits down and he’s absolutely giving you 100 percent, all day long. There’s no faltering.

DH: In regard to the kit and production, was it the Neil Peart signature sound? Or because this was a different environment than Rush, obviously being Vertical Horizon, did you go for something different?
MS: Mark Valentine was the engineer on it, and he and I were talking a lot beforehand about what we were going to try and go for with the sound.

On some of Neil’s records I’ve heard his tone be very succinct and very specific: very isolated microphones, with maybe a reverb added on top of that. I was hoping to get a little more room sound on this, as opposed to that real precise tone that I’ve heard on some of the records.

Big Jazz
Neil had all these awesome voices that he could use, but the really cool thing about it was that when I was sitting down there behind his kit, it’s very much oriented like a jazz kit would be. I could conceive of it that way: There’s the one tom in the middle, so you’re almost looking at an extended jazz kit. If you think about it that way, it’s not as scary.

DH: As opposed to the older kit which was double kick, four concert toms, three racks, two floors, and on and on.
MS: Right, with the two timbales, the wind chimes and crotales, wood blocks and cowbells. He still has the cowbell set up, but it never felt intrusive. In fact there was only one time, at the end of “Even Now,” where I was like, “Dude, we’ve got to hear that big…”

DH: The flurry.
MS: Yeah, that big roll — give it to me all the way from the top to the bottom. He was like, “Great, cool, I’ll do it.” And in the track it just sounds so beautiful. I remember when I first listened to “Vital Signs” from Moving Pictures, there’s this one fill that goes from the high tom all the way down (as he air drums the fill). You know, it’s so exciting, so I was so fired up to have a moment like that.

DH: You got his signature.
MS: Yeah, and it’s totally cool. Because with Vertical Horizon, I definitely have a vision of what I want the band to be, and part of that involved keeping songs pretty short. You know, not going too crazy and always wanting to leave people wanting more, or just not wanting to bore somebody.

DH: “Don’t bore us, get to the chorus.”
MS: Right, but as we were doing “Even Now,” I noticed it was something like six minutes and 30 seconds, which is two minutes more than most of the songs that I have been involved in in the past. But I wasn’t bored. I didn’t lose interest at all.I was captivated by the way it was all coming together. So there’s like a two-minute portion at the end of the song where Neil is just really playing. Everything’s building around him, the strings are coming in and all these other vocal parts are coming in and around, and the drums are the featured instrument as the song comes to a close.

CH-CH-CH-CH-Changes
DH: Which CD is going to come out first, this one or the new Rush?
MS: That’s a good question. I’m shopping for a deal right now because I’m leaving my label, so I don’t know where it’s going to wind up, but a lot of changes have been happening like that in my life. There was a time when I would’ve been really freaked out by that, but I’m not at all now.

DH: I find that if you embrace sudden changes, you’re one step ahead of the game. If you sit there and say to yourself, “Uh oh, now what, I feel lost”… then you are lost. But if you look at it as though one thing ending opens a door for something new to happen…
MS: Exactly, I’m totally open to embracing that. I don’t have all the answers, but it will all come clear as time moves forward.

Raising The Bar
DH: No disrespect to any of the other drummers you’ve played with, but you’ve certainly raised the bar for yourself quite a bit now. How will you maintain that, with or without Neil, and where do you go from here?

MS: That’s a really good question. I think that you’re absolutely right — the bar couldn’t be raised any higher. I’m not sure what comes next.

DH: Are there any other people on your list? Now that you’ve got Neil on your credits, I’m sure in some ways it will open up doors to you approaching other drummers that maybe you wouldn’t have approached before.
MS: You know, that’s a really good point. And Neil’s playing on the project was a real vote of confidence from him to me. That means a lot to me because it’s not something that he does.

DH: Other than Jeff Berlin, you might be the only other one.
MS: Right, Jeff Berlin and the Burning For Buddy stuff, and that’s it. So, it couldn’t be a more wonderful compliment. I’ve tracked with Gregg Bissonette and he’s an incredible player. You know who else I really love is Nate Morton, who did the rock star INXS show and now rock star Supernova. Also Gavin Harrison, who plays with Porcupine Tree. You know for me, the ultimate is the kind of player that can mix some of the real “out technique” stuff with the real fat, basic meat-and-potato groove playing. Simon Phillips is another guy I just have so much respect for. I had Protocol back in the day and I remember listening to that, and “Give Blood” is one of my favorite drum tracks.

DH: “Give Blood” is the quintessential rock drum track of our time. When I heard that track, I called Simon up and said, “Man, you’ve done it!” That track could not have been played any better.
MS: I know — it’s sick! With Gilmour on guitar. That’s kind of like a master class in tasteful technique. To me, it all starts with the drummer. If the guy who sits down at the kit owns it and has the ability to propel the music and make the music better, make the music greater, then everything else comes easily. If that groove falters or is hesitant, or if the time sense changes or rushes, then everything else falls apart. That’s why it’s so fun for me to do this interview: there’s nothing more important than you.

 

 

 

 

 

 

http://www.drumheadmag.com/web/feature.php?id=7

 

 

 

 

 

 

Share

guide to snare drum placement

Synopsis: Learn how to place the hardware on the shell of a snare drum. A step-by-step, pictured drum builder guide!

I have done this guide using common DIY tools which are readily available if you don’t already have them. I have also used a Drum Foundry.Com layout mat. You can either order one of these, or draw your own (or alternatively use a flexible ruler around the shell)

Tools:
DF Layout Mat
Masking Tape
Tape Measure
T-Square
Pen
Hand Drill
Pilot Bit
Unitbit (stepped drill)

Guide:
For this exercise I’m using a 12” x 5” snare shell, already wrapped.

Firstly, prepare the shell for marking using masking tape – Note if this was a lacquer or Oil finish I would use blue painters tape as its less tacky.

As this is a wrapped shell with a visible seem I like to hide that with the Throw off placement. I use this point to set out the hardware.


The function of the DF layout mat is to divide the shell evenly to ensure the lug positions suit the hoops. For a 12” 8 lug snare, the red lines on the mat represent the lug positions.  The green line shows the Throw position, and butt position on the other side of the shell.

When one end of the shell is marked, use a T square to transfer those marks to the other end.

Now rule a line down the shell joining the marks, repeat around the shell.

I’m using double ended lugs on this shell which will be fitted centrally. Firstly establish the measurement between the two lug fixing holes. In this case 52mm.

Now mark the center of the shell and from there measure 26mm either side ( thats half the lug measurement) That fixes one lug centrally on the shell, double check the overall dimension is correct. Then repeat around the shell.

Repeat the process for the throw off and butt. I’m fitting the throw centrally and the butt end in line with the bottom lug holes.


I have also marked out for two air vents, this is down to individual preference as to whether you have 1, 2, or none at all. Ive gone for two as its a very thick shell, and the vents will emphasive the loud crack i am looking for in this snare.

The shell is now ready for drilling. I recommend drilling small pilot holes firstly, then repeating with a unibit, marked at the hole diameter you require. This will vary from 4 – 7 mm depending on lugs used.



When drilling use a scrap block of wood on the inside of the shell as you drill, this reduces the wood splitting as you drill through. DON’T use a high powered drill / hammer drill, use a drill with speed control, use sharp drill bits and go slow.

The shell is now ready for fixing lugs , throw etc.

Here’s the finished snare. 12” x 5” Birch Snare,  18ply 10mm thick, finished in Yellow Glass Glitter Wrap. Die cast lugs, Traditional throw and Aquarian drum heads. This snare drum and others available through Onlinedrummer.com.

 

2k5ba09c7a51.jpg

http://onlinedrummer.com/article.php?id=72

Share

the man with 4o snare drums

Synopsis: Little did he know that joining OnlineDrummer.com would eventually lead him on a self-made quest for more and more unique snare drums. From OnlineDrummer.com to Japan, follow Martin’s quest for snare drums as he keeps us posted with his remarkably unique collection.

How many snares have you owned throughout your life?

Martin: I’ve pretty much kept all the snares that have come into my life apart from the first two drum kits I owned.  My first kit was an old 60’s kit with a red sparkle and I was 14.  I didn’t realise at the time, and until later on, the importance of the snare drum or else I would’ve kept it.

The same can be said about my 2nd drum kit, a Premier Royale.  I traded that kit in for a Ludwig Power Plus, and I have kept the snare from that as initially it held good memories of times with my first band and gigs that had an impact on my future.

So I’d say that with the current snares that I have and ones I’ve passed on to other people, it would be around 40 snares.  I sold a couple of snares to two members on OLD.  I know one is gigging with his, and he’s more than happy with it.

I also gave a snare to a young colleague I used to work with.  I had a duplicate, all be it from an asthethic point of view. I had two Saturn snares of the same size but different colour, and I know that my young colleague would benefit from it more than me so I left it on his desk one morning with a note that said “Once this drum has finished with you, allow it to move on to the next person it needs to help”.  It may seem a tad crazy giving a snare away but I had my reasons and so far my friend’s playing and enjoyment of drumming has come on leaps and bounds.

What got you into snares?

Martin: Well for a long time, mostly the 90’s and into the millenium, I had the Ludwig snare and a Pearl Steel Mirror Chrome snare.  On a weekend holiday with a girl, we happened to come across a drum store, and I had one of those “Got to buy a drum moments” (the first of many!) and purchased a 13″ Piccolo Steel snare, because it was different.

I didn’t realise the impact of that different snare for a few years until I joined onlinedrummer.com and read many posts and threads about snares and then became aware of the importance of the snare drum’s place in the drum kit.

I went and purchased a Chad Smith snare because I had another “Gotta buy a drum” moment on ebay and then close after that I won a snare drum in a competition run by Animal Custom Drums, and that really got the ball rolling because of the small amount of snares I owned at that time. Each one looked different and sounded different.

In your opinion, what makes a good snare?  What makes you say, “Ive got to have it!”?

Martin: A good snare to me must have the personal factor.  I need to make it my own, in a sense, not like any other snare on the planet. Granted I’ve got some basic snares but I do tend to pick rare editions.  I’m a fan of Mapex’s Black Panther series and have more of them than any other make.

To me, the asthethic value has to be there too.  I like to look at the snares, as well as play them.  I do have a few snares that will never be seen on stage at a gig.  They are too rare, or the personal value of them to me is too great to risk.  I have five Neil Peart snares, all of them from the DW company and much as I love their sound, I cannot gig them for fear of loosing them.  I might just buy a duplicate and then I can gig that.

Every snare I own is different.  There are no more duplicates.  I have wood, metal and acrylic snares.  I like to think I have every spectrum covered.  My gigging snares are varied too.  My most common gigging snare, the main workhorse, is a DW edge snare with a matching DW popcorn.  I do have four Animal snares now, and recently asked Carl to build me a Steambent solid wood Cherry shell with gold hardware.  That will end up, I hope, being an alternate with the edge.

Has having a selection of snares come in handy at times?  If so, example?

Martin: Its been very handy.  I’ve had many moments where I’ve been in a position to take a snare drum to suit the venue.  That may seem a tad overkill but it is a nice position to be in.  I’ve got no kids.  I don’t smoke, and I don’t drink.  So I save and work hard to be able to buy the snares.  I also have a very understanding partner and she’s even pointed out snares to me in shops and online too.

Having a vast collection has enabled me to learn more about snare drums and their construction.  Having so many snare drums does have a downside — storage.  I have a stack of snares in the corner of my living room.  They need to be cleaned as I don’t have a display cabinet and they are then out in the open air and get dusty.  I used to have to buy a case or a bag for each new snare but gave up long ago as it got expensive, but now any retired snare ends up secured away in a box waiting for when I can get a display case.

Are there any snares in your collection that you deem “untouchable”?  You value them too much…

Martin: I have quite a few that are so very rare that they are untouchable.  My Neil Peart collection. I have a Tama Warlord snare (13″) that is one of only 200 ever made.  I have an Animal Snare that is the first of its series and thus is so very dear to me that I can’t really take it out of the house.

I spend ages searching for some snares.  In all honesty it is sometimes the hunt for the snare that is the most thrilling.  I spent three years searching for a Tico Torres (Bon Jovi) snare on Ebay.  I refused to look anywhere else.  I just hawked Ebay and finally got a 2nd hand one in pristine condition, and I do gig that one.

I bought a Tama Brass snare from a Japanese website because that was the only country I could get that particular snare from.  It was a signature snare for the drummer Pat Torpey (Mr Big) and when I had the privilege to interview him for onlinedrummer.com, he showed me his snare and it was such a lovely snare to play that I just had to have one.  The hunt and subsequent retrieval of that meant that I couldn’t gig it but I would love to record with it one day.

So most of my collection aren’t doing what they were built and designed to do, but they give me great pleasure seeing them, holding them, and talking about them.  I also know that I’m not alone.  There are other collectors worldwide with a stronger passion for collecting than I do.  I’ve made some good friends and contacts through collecting snare drums.  Although expensive, it is a great passion and hobby on so many levels: playing, building and maintaining.

http://onlinedrummer.com

Share

Styles of drumming

The many varied different styles of drumming all occur because of the segregation of cultures. Although at first this may sound like a bad thing, it’s really not. The beauty is that not we can step outside our own culture and find different styles of drumming. Different styles of drumming range all across the world, from American to Japan to Liverpool and even far in the depths of the tribes in Africa and Australia. Although when we think of drumming we automatically think of the generic drumming we heard from most bands on the mainstream radio stations drumming ranges far beyond what we hear in these places.

The great thing is that not just the style changing with the rhythm, the style changed with the sound of the drum. Often some styles of drumming are automatically definable, and even when these styles of drumming aren’t definable we can still identify them as being foreign, or outside our culture. Samba music is based around drumming, where different drummers drumming in synchronisation all parade through carnivals in Brazilian festivals, the sounds range from drums as big as huge containers to simple hand percussion, this style of drumming is very rhythmic, there is often no melody or little melody, there is often no harmony and the drums are the main focus of the song, which I think is amazing.

The style of drumming is interesting because it is so different to the way we work with drumming styles in the UK. UK drumming styles are often not the focus to the song but help to song to keep a static beat or tempo. Learning from different cultures like this, about different drumming styles can help us to look at our own drumming styles from a different perspective and also give us the ability to appreciate other styles of drumming.

 

http://www.beyonddrumlessons.com

Drumming styles from across the globe can help to progress musically in our culture, giving us the chance to become more diverse and free, which means we will be less stuck in our own narrow minded ways which stop us from moving forward, may the future for music be free and open. Allow us to open our minds and senses to make fresh music. I encourage you to look beyond what is stated in front of you and search outside what we are used to. Become seduced in culture and become knowledgeable about other cultures. Make your change today.

Article Source: http://EzineArticles.com/3467721

 

Share

Used Mapex Drum kits

 

mapex drum sets

Mapex Drums is a brand made by KHS Musical Instruments Company of Taiwan. KHS also produces band and orchestra instruments. They have been producing quality drums for over 15 years. Although Mapex Drums has not been around as long as some of the other drum manufactures, it is one of the fastest growing drum makers on the market today. They have quickly grown from one small shop to a large international company.

There are currently seven different series of Mapex drum sets for 2009. The beginner Mapex drums are the Q, QR, and VX series. These are made with basswood plies and come in basic configurations as entry level kits. The intermediate level sets are the Meridian Birch and Meridian Maple. These have more advanced features than the beginner kits and are Mapex’s most popular series of drum sets. The two professional quality Mapex drum sets are the Saturn and the Orion. Each is constructed with premier shells and hardware to optimize sound and durability.

 

http://www.usedrumsets.com/mapex-drum-sets

Share

Great entry level drum kits

Here’s a Sweetwater link to some reasonably priced student drum kits.

 

 

http://www.sweetwater.com/c1016–Acoustic_Drum_Kits

Share

Buying a cheap drum set

If you go through a market you can find out various types and ranges of drum sets. Among these various drum sets you can choose according to your requirement and budget. If you are a beginner and you want to buy a drum set or you want to buy it for your child whose age is just 4 or 5 years, then there is no meaning of spending thousands of dollars for an expensive drum set. As a beginner you don’t have to spend thousands on an expensive drum set to get started with your drum lessons. It is always better to buy a cheap drum set for the beginners and the children below the age of 12.

A cheap drum set includes everything that a person needs to get started. They are relatively inexpensive but also consist five-piece set of drums, cymbals, sticks and the hardware items. If you want to go for further cheap drum set then there is an option of 3-piece drum set. When you are buying ones that are little less in prize, its just you are compromising a little with the quality, but on the other hand buying an expensive drum set during the course of learning is a risk as you may not like to learn further after a few classes. It is only better to move on to expensive branded drums only if you decide to take on drumming seriously.

There are brands like Pulse Pro Drums, Verne Vide Drums, Coda Drums and CB Drums that manufacture drums for the beginners and offer them at decent low prices. There are also companies like Cannon Drums, GP Drums, Sunlite Drums, TKO Drums and Union Drums that offer drum sets for the children those who are below the age of 12, that also at very low prices.

After using for some years if you feel like taking up drumming seriously then you can also upgrade these cheap drum sets by replacing the drum heads with better ones. You can also replace the cymbals and bass drum petals to upgrade your drum set. There are many companies that offer to upgrade your drum set that also at a very reasonable cost.

You can also spend a little money on a better drum kit manufactured by an established company. They usually give a better warranty and can provide you a good resale value if you want to sell it off to move on to a better drum set. Companies like Ludwig, Tama, Drum Workshop, Mapex, and Premier offer them at a very affordable price.

You can also get cheap drum sets if you buy a second hand set. You can also buy second hand ones online. There are many websites that offer them at a very cheap price. You just need to select the drum set carefully with all the details about you. Also, if you buy a brand new drum kit online then also you might get it at a very cheap price as they offer huge
http://www.beyonddrumlessons.com

Share

dunnett classic snare drums

The Gospel According To Ronn

by Rick Van Horn

photos by Jim Esposito

KEY NOTES
  • Unique construction methods and design elements
  • Outstanding construction quality
  • Stainless Steel drum offered surprising tuning range
  • Milkwood drum combined vintage and contemporary characteristics

 

North America has a plethora of custom drum builders, and Canada alone has a sizeable number. Among these builders, Vancouver, Canada’s Ronn Dunnett has managed to establish a pretty high profile. He’s a tireless supporter of live drumming events, and he’s a major force behind the popular drumsmith.com Web site. These activities undoubtedly contribute to his recognition factor. But amid all the hoopla, he also manages to create some pretty spiffy drums.

 

Although Ronn does build drumkits, his bread and butter comes from distinctive snare drums made of titanium, stainless steel, brass, bronze, copper, composites, and a wide variety of domestic and exotic woods. Ronn machines the shells to his own specifications and fits them with hardware of his own design.

 

Many of Ronn’s theories about shell design, bearing edges, and what makes a drum sound a certain way fly in the face of conventional wisdom. But that’s just fine with him, since it helps to set his drums apart from those of other custom manufacturers.

General Characteristics

dunnett_snares.jpg

For this review we were sent a 51/2×14 Stainless Steel drum, a 61/2×13 Titanium drum, and a 51/2×14 Milkwood MonoPly drum. All came fitted with R Class chrome-over-brass tube lugs, R Class throw-offs, Hypervent I adjustable air vents, 2.3-mm triple-flange hoops, Remo coated batter heads and hyper-clear snare side heads (exclusive to Dunnett), and 42-strand snappy snare wires.

 

Each drum bears Ronn’s signature, an individual serial name, and the date of manufacture written inside the shell. And, as befits the work of a noted custom drum builder, every construction element of our three review drums was outstanding.

Earlier, I mentioned Ronn’s theories of manufacture. According to Ronn, variables of weight and mass determine the voice of a drum as much as do that drum’s dimensions. More specifically, he believes that heavier drums do not produce greater volume. So his designs focus on shell thickness (or more accurately, thinness) and weight, combined with low-mass/minimal-contact hardware, the efficient use of lugs (eight maximum, as on all of our review drums), and undersized diameters.

 

Dunnett drums also feature what Ronn calls “soft” snare beds. These beds are contoured quite deeply, and are cut to run just past the lugs on either side of the snare throw-off or butt. This design is intended to eliminate snare buzz and to accommodate the use of 42-strand snares.

R Class Throw-Offs

Ronn Dunnett designed the R Class Throw-Off to be durable, functional, and convenient—and it’s all three. It’s an all-metal unit that features excellent machining, fit, and finish. It operates smoothly, with a lever that’s big enough to grasp easily but that isn’t cumbersome.

 

Best of all, the entire throw-off mechanism can be rotated 180°. That means that you can select the direction in which you want the throw-off lever to move—toward you, away from you, straight out from the side of the drum, whatever—no matter how you have the drum positioned on the stand. (Lefties take note!)

 

Our review drums all came with original R Class throw-offs. However, by the time you read this, all Dunnett drums will be supplied with the upgraded R2 throw-off and butt end. This unit offers the features of the R Class, but adds a coupling system that allows the snare wires to be removed from the throw-off and butt without the use of a drumkey. This quick-release feature reduces the amount of time and effort involved when changing the snare-side head.

Hypervent I

The Hypervent I is an adjustable valve that allows you to determine how much air you want to escape from the drum when it’s struck. You turn a small knurled knob to fully open or fully close the vent, or put it anywhere in between.

 

Ronn created this option because he believes that the air inside a non-vented drum acts as a pneumatic transducer, carrying the vibration of the top head to the bottom on a 1:1 ratio. Thus a drum without a vent is likely to be more sensitive and more responsive. Under conditions of more aggressive playing, where sensitivity is not an issue but sheer volume is, venting a drum will prevent the drum from “choking,” and will allow it to project to its fullest capacity.

Classic Titanium

The 61/2×13 Titanium drum we received certainly supported Ronn’s claim that his Titanium drums feature “the lightest metal shell available—period.” It weighed only eight pounds (as compared to the Stainless Steel drum’s ten pounds). It featured a raw titanium finish, with no lacquer coating.

 

The edges on Dunnett metal-shell drums are distinctly different from those found on virtually all other metal snares. They’re pretty much just the smoothed-over edge of the thin shell itself, with no added contour. Ronn Dunnett puts it this way: “What makes a crash cymbal and a China type sound so different? The flange. When you bend something, you alter the way it resonates. That principle also applies to a metal drumshell. Virtually all metal snare drums have a flange that serves as a blunt bearing edge. Dunnett Classic drums do not have a flange. As a result, they resonate clear and clean, with full sustain. A non-flanged edge also provides for easy and precise tuning.”

 

In this instance, I have to disagree with Ronn about the easy tuning. It took us a quite while to find the optimum combination of top and bottom head tension for this drum. The issue seemed to be the drum’s depth. It wanted to be a fatback drum, and as soon as we tightened the batter head beyond a medium tension, it started to choke up. When we finally found the right tension combo, though, the Titanium drum had a distinctive quality: full, yet fairly warm—and very dry (once the drumhead ring was taken out of the equation).

 

The Hypervent didn’t have much effect on this drum—until we found that optimum head-tension combo. After that, we heard (and felt) a much more dramatic difference between the vented and unvented response of the drum. It was very crisp and even dryer when unvented. When vented, it was brighter, and it spoke with more authority.

Stainless Steel

With its mirror-smooth finish, the 51/2×14 Stainless Steel drum was the very definition of “gleaming.” I almost hated to handle it, owing to the fingerprints I left on the shell. (White gloves, anyone?) But that reluctance was reduced by the enjoyment I received from playing the drum.

 

Steel is a heavier, denser metal than titanium, so it wasn’t surprising that the Stainless Steel drum produced a crisper, brighter, and more powerful sound than that of the Titanium model. Our review drum’s shallower depth also contributed to this acoustic character. Surprisingly, though, the Stainless Steel drum had a wider effective tuning range than did the Titanium model. With the batter tensioned just a little tighter than medium, it could easily be a fine symphonic drum, with excellent snare response (made even more prominent when the Hypervent was closed). On the other hand, if you wanted a bullet-through-the-brain rock crack, you’d just need to crank this baby up and open the vent.

 

The resonant character of the Stainless Steel shell gave this drum an almost timbale-like over-ring when it was played close to the rim. Actual rimshots rang for days. But this could be easily eliminated with a minimal amount of batter-head muffling if so desired.

Milkwood MonoPly

Dunnett is best known for metal-shell drums, but the 51/2×14 Milkwood MonoPly drum we tested was pretty impressive in its own right. “Milkwood” is Ronn Dunnett’s proprietary name for the exceptionally lightweight wood used to make this drum.

 

I’m partial to solid-wood drums, because they generally provide the best acoustic characteristics of wood while also offering reflectivity and projection that approaches that of metal. Depending on the type of wood and its thickness, solid-shell drums can sometimes be unexpectedly bright. But Dunnett solids are substantially thinner than other drums I’ve seen. They also feature reinforcement rings that are reduced in depth and diameter. The result, according to Ronn Dunnett, is that his solid-shell drums are the lightest on the market.

The Milkwood drum, with its thin shell finished in clear matte lacquer, produced a sound that was exceptionally warm and rich. It was neither too ringy nor too dry, and it responded dramatically to Hypervent adjustments. Its maple reinforcement hoops helped to focus stick attack before the sound “spread out” within the main shell body. Overall, I’d describe this drum as an outstanding hybrid of vintage and contemporary characteristics.

 

In spite of what was said earlier about deep snare beds, at first I didn’t think the Milkwood snare even had a snare bed. It did, but that bed was very wide and much shallower than that of the metal drums. The resulting amount of “flatted” bearing edge that came into contact with the snare-side drumhead was likely a contributing factor to the drum’s controlled sound. Ronn Dunnett informed me that this bed was cut on this drum only, by special customer request. The same drum with a “standard” deep Dunnett snare bed might be a little brighter.

You Get What You Pay For

I could end this review with the typical “custom drums command a custom price” comment. But to be honest, Dunnett prices are surprisingly affordable, considering the drums’ unique design, construction quality, and acoustic performance.

Ronn Dunnett spares no expense in the creation of his drums, but neither does he inflate his prices unrealistically to capitalize on the “custom” mantra. Just like his design concepts, this sales philosophy is an original—and very refreshing—approach.

 

THE NUMBERS

  • 61/2×13 Titanium snare drum $995
  • 51/2×14 Stainless Steel snare drum $595
  • 51/2×14 Exotic Monoply Milkwood snare drum $695

 

http://www.harmonycentral.com

Share